Smok X-Priv Mod Prism Rainbow

Smok X-Priv Mod Prism Rainbow

The Smok X-Priv mod features a huge screen which is beginner-friendly, and hits up to 225W.
$99.95

DETAILS

  • Great for beginners to advanced vapers, people who love touchscreens and want 225W power with the versatility of two 18650 batteries.

WHAT'S IN THE BOX?

  • x1 X-Priv mod
  • x1 USB cable
  • user manual

SPECS

  • Power and range: 1-225W
  • Modes: Wattage (VW mode)/TC mode (Ti, Ni, SS), Memory mode
  • Coil resistance minimum: 0.1Ω-2.5Ω (VW mode)/0.05Ω-2Ω (TC mode)
  • Temperature range: 200-600F/100-315C
  • Safety: Short-circuit protection
  • Connection threading for tank: 510 (standard)
  • Charging: USB 
  • Material: Zinc alloy
  • Dimensions: 88x46.5x30.4mm
  • Weight: 172g

FEATURES & TIPS

  • Use this unit with two brand new matching batteries and use a separate 18650 charger for best results.
  • Easy to use, intuitive, and powerful mod with a huge OLED screen. The fire button is the entire left side of the unit.
  • Switch on and off press power button 5 times within 2 seconds.
  • Choose your mode by pressing the fire button and – button for 2 seconds to get into the menu.

POWER (V/W)

  • Simple mode that will work on most coils, but more prone to dry hits with lots of chain vaping.
  • TC - Temperature Control Mode: for suiting to specific coil types e.g. nickel NI, titanium TI, or stainless steel/SS.
  • For more detailed explanations of the settings, read the instruction manual with the unit.
  • Ramp up option by pressing the fire key and + buttons. Norm/Hard/Soft in VW mode or 10-225W in TC mode, or MEM:1-23 in Memory mode.
  • Lock the device by pressing the fire button for 5 seconds.
  • Power off by locking the device then holding the fire button for 5 seconds. You can also power off by using the regular menu.

TROUBLESHOOTING

  • Unit reading ‘BATTERY LOW’? Charge the batteries.
  • Unit reading ‘BATTERY HIGH’? Input voltage is higher than 9V, you won’t be able to power on. This could indicate a faulty battery.
  • Unit reading ‘NO ATOMIZER’? The tank isn’t detected. Check the connection points and/or change the coil.
  • Unit reading ‘ATOMIZER NEW/OLD’? Shows when you change the tank. Select NEW when you’ve changed the coil. 
  • Unit reading ‘OHM TOO LOW’ or ‘OHM TO HIGH’? The coil has shorted. Change the coil and try again.
  • Unit reading ‘ATOMIZER SHORT’? A short circuit has occurred, change the coil and try again.
  • Unit reading ‘TEMPERATURE TOO HIGH’? The temperature limit has been exceeded. Let the unit cool down and try again.

You might also like

Smok X-Baby TFV8 Tank

Smok X-Baby TFV8 Tank

$49.95
Smok TFV12 Prince Tank

Smok TFV12 Prince Tank

$59.95
Smok X-Priv Mod Gunmetal Prism

Smok X-Priv Mod Gunmetal Prism

$99.95