Kangertech K-Pin Mini Blue

Kangertech K-Pin Mini Blue

Great for absolute beginners and experienced vapers who want a small stealth device.*E-liquid not included* *Ships to NZ Only*




  • 1 x K-Pin Mini
  • 1 x 0.5ohm SSOCC coils
  • 1 x USB cable
  • Instruction manual


  • Power and range: 1500mAh
  • Coil resistance minimum: 0.15ohm
  • Tank capacity: 2mL
  • Safety: 10 second cut-off, short circuit protection, overcharge and overheat protection
  • Charging: USB
  • Material: Aluminum zinc alloy 
  • Dimensions: H: 120mm; D: 22mm
  • Weight: 120g


  • Switch on and off by pressing the power button 5 times.
  • Telescopic mouthpiece: simply twist the black top section to make the mouthpiece rise up and twist in the opposite direction to retract.
  • Push down and unscrew the top mouthpiece section to fill.
  • Automatically adjusts wattage to your SSOCC coil.
  • Airflow is non-adjustable.
  • Charging indicator: 5 lights indicates a full charge, as the battery power decreases the number of lights will decrease. When the battery has fully drained, they will flash 15 times and the unit will switch off.
  • To change the coil when the unit contains e-liquid, hold it upside down when unscrewing the middle section to keep the e-liquid inside the tank.


  • Spitback or gurgling? Use slow, controlled inhales. Pulling too hard can cause spitback by flooding the coil. 
  • Hold the power button down for two seconds before inhaling to allow the e-liquid time to be vaporized.
  • Remove the coil, wipe it clean, and replace.
  • Avoid overfilling the tank. 
  • LED flashes 6 times and switches off? Unit has overheated, let it cool down and try again.
  • LED flashes 15 times and switches off? Battery has drained and needs to be recharged.