ULTIMO atomizer adopts new top filling system and improved adjustable airflow control.
New MG series heads with novel designs especially provide great vaping experience, including which the innovative MG Ceramic-0.5ohm head with long-lasting lifespan brings you a pure flavor ever.
Spiting and leakage will be avoided. It especially can be used under high temperature condition, providing large vapor production.
ULTIMO atomizer is easy to carry, install and refill.
- Size: 22.0mm by 55.0mm
- Capacity: 3.5ml
- Color: Black
- Applicable Heads: MG Ceramic-0.5ohm head and MG Clapton-0.5ohm (standard configuration)
- Mouthpiece: 13.0mm by 12.0mm
- Prime the coil by dripping e-liquid through the side vent holes until saturated.
- Refill the tank with the airflow closed. This helps create a vacuum within the tank which prevents leaking.
- Don’t over-tighten the coil or the base. They should be easy to remove without resorting to pliers, but not loose.
- Make sure your wattage is high enough and take full draws. If the coil doesn’t get hot enough to vaporize all the excess liquid, it will build up and leak through the airflow section.
- Store standing upright when not in use.
- Disassemble and clean the tank. When it is completely dry (this is crucial because any pockets of moisture will funnel leaks), refit the O-rings.
- Prime a new coil and fit it, then close the airflow and refill.
- Open the airflow, and draw gently through the mouthpiece with no power, until a bubble comes up.