Focusvape Pro S

Focusvape Pro S

Step up from the Focusvape with the Pro S model which allows you to customize your temperature settings.

The Focusvape Pro S is for dry herbs, and for the best experience, you will need a grinder to make sure the herb is finely ground before use. The mouthpiece can get hot with heavy usage, so there is a silicon mouthpiece cover included to solve this problem. 

When compared to the Fpcusvape, The Pro S lets you customize the temperature to your preference instead of using the pre-set temperatures.


  • Replaceable 18650 battery included (stash a pre-charged spare for on the go)
  • Large ceramic heating chamber
  • Airflow control
  • Temperature range 176-464F/80-240C.
  • Vibration alerts you when the desired temperature is reached 


  • 1 Vaporizer unit with glass mouthpiece and 18560 battery inside
  • 1 USB cable
  • Tools: x1 brush, x1 poker 
  • 3 replacement screen filters
  • 1 silicon mouthpiece (for sharing and/or overheating glass mouthpiece)
  • 1 USB charger
  • 4 Alcohol wipes for cleaning
  • Instructions
  • 1-year guarantee


  • FIRST USE: Unscrew the base and remove the paper insert. Screw the base back in and switch the unit on by pressing either of the < or > buttons 3 times. Plug in the USB charger. When charged, give the unit a "dry burn" before use by removing the mouthpiece and turning the unit on for a minute at 240C/464F to burn off any residual glue inside the unit from the manufacturing process. After that, you are ready to go.
  • FILL: To remove the mouthpiece, unscrew it counter-clockwise. Fill the chamber halfway and replace the mouthpiece.
  • SWITCH ON AND SET TEMPERATURE: Switch on by pressing either of the < or > buttons 3 times. The unit will vibrate and the Focusvape logo will appear on the screen. Choose the C or F setting using the < and > buttons, holding it down to save. Set the temperature by pressing the < or > buttons 
  • HEAT UP: The display will show the unit heating to your desired temperature, and will vibrate when it is reached.
  • AIRFLOW: Adjust the airflow by rotating the dial ring. 3 holes is maximum airflow.
  • SLEEP MODE: Each chamber heating duration is 5 minutes, then it will go into sleep mode for 3 minutes. After that, it will switch itself off.
  • SWITCH OFF: Press both the < and > buttons until the unit vibrates to show it has switched off.

You might also like

Replacement Screens for Focusvape and Focusvape Pro S

Replacement Screens for Focusvape and Focusvape Pro S