The Focusvape is for dry herbs, and for the best experience, you will need a grinder to make sure the herb is finely ground before use.
- Replaceable 18650 battery included (stash a pre-charged spare for on the go)
- Large ceramic heating chamber
- Airflow control
- Set temperatures: Green 160C/320F, Red 170C/338F, White 180C/356F, Purple 190C/374F, Cyan 200C/392F, Blue 220C/428F
- Vibration alerts you when the desired temperature is reached
WHAT'S IN THE BOX?
- 1 Vaporizer unit with glass mouthpiece and 18560 battery inside
- 1 USB cable
- Tools: x1 brush, x1 poker
- 3 replacement screen filters
- 1 glass mouthpiece (spare)
- 1 silicon mouthpiece (for sharing)
- Instruction booklet
- 1-year guarantee
- FILL: To remove the mouthpiece, hold the mouthpiece and pull towards yourself. Fill the chamber halfway and replace the mouthpiece.
- SWITCH ON AND SET TEMPERATURE: To turn the unit on and off, press the power button 4 times quickly. The unit will vibrate and the LED light will flash 3 times to indicate the battery capacity (white: fully charged; green: average charge; red: low charge, change the battery or recharge now).
- HEAT UP: Press the power button again to activate the heating chamber. The LED will flash blue to show it has reached the first temperature setting. Press the button twice again for each temperature increase.
- FIRST USE: When charged, give the unit a "dry burn" before use by removing the mouthpiece and turning the unit on for a minute at 220C/428F (blue) to burn off any residual glue inside the unit from the manufacturing process. After that, you are ready to go.
- REGULAR USE: When the LED is solid and the unit vibrates, it is ready to use.
- AIRFLOW: Adjust the airflow by rotating the dial ring. 3 holes is maximum airflow.
- SLEEP MODE: Each chamber heating duration is 5 minutes, then it will go into sleep mode for 3 minutes. After that, it will switch itself off.
- SWITCH OFF: Press the power button 4 times quickly.